Mobile DVR Specifications

Solution Detail




4-Channel Mobile DVR
  • MPEG-4 Technology for Video Compression
  • External EDGE/GPRS/CDMA/WI-FI Module
  • Stand-Alone embedded Operating System
  • Video Recording & Playback at 30fps per channel
  • Built-in GPS
  • Two USB Ports for Video Download
  • 4 Channels of Video and Audio recording

Our solutions will record 30fps of video from 4 cameras along with audio. All four channels can be view simultaneously. The mobile DVR will house 80GB, 160GB and 250GB 2.5” Hard Drives.


Files are stored on the Hard Drive by the Date and Time the file was recorded. Files are easy to find, upload and able to be viewed with just a few clicks. Our solution gives transit officials an efficient and easy ability to monitor their fleet vehicles, operators and passengers.

  • Ruggedized
  • Scalable
  • Ease of Use
  • Plenty of Storage
Product Specifications
SYSTEM
  • OS - Linux. (Standalone Operating System)
  • Operation Interface - Hand-held, IR Controller w/On-Screen Display for operations of MDR
  • Storage - 60, 80, 120 & 160GB 2.5” Removable Hard Drive Capacity Supported
  • Storage Protections - Mobile anti-vibration and shock resistance
  • Signal System - NTSC/PAL
  • Input Voltage - 12-volt DC or 24-volt DC (can range from 8 V-55V DC)

VIDEO
  • Camera Output - Up to 4 Cameras
  • Display - 4 Video Window Screens
  • Image Quality- 8 Level Adjustable
  • Fwd/Playback Speed - x2, x4, x1/2, x1/4
  • Stream Standard - ISO 1449
  • Record Resolution - Selectable recording resolution (CIF, half D1, D1)
    * NTSC: CIF (352x240), half D1 (704x240), D1 (408x480)
  • Image Compression - 12.5K-112.5KB/s, 25K-150KB/s
  • Max FPS - 200/240 FPS (25/30 fps/CH at CIF, 12.5/15fps/CH at HD1, 6.25/7.5fps/CH at D1)
  • Display Res - TV Monitor 704x480 for NTSC at D1

AUDIO
  • Audio Input /Output- 4 Stereo / 2 Stereo
  • Audio Compression - ADPCM

INTERFACE
  • TV-Out- 2 Composite Outputs with BNC connectors
  • VGA - 1 D-SUB 15-pin Port
  • LAN - 1 RJ45 10/100BT Ethernet Interface
  • USB- Support USB OTG Technology. (USB 2.0)
  • Serial - RS-232 x 3; RS485 x 1
  • Network - TCP / IP

POWER
  • Ignition Switch - Device operates on ignition. Auto Shutdown delay after ignition power off
  • Power Consumption - Average 15W
  • Power Adapter - 8-55V DC. Typical 12V DC @5A, 24V DC @ 3A

ALARM
 
  • Input - 8 Input Sensors. (Meta-Data) Brakes on, Door Ajar
  • Multi-Mode - Auto-reset after power-break, auto-alarm when missing signal. Camera Cover Alarm
 

About Us | Contact Us | Product Divisions | Login Direct Sourcing | Login To E-Store

©2009 Fortress Systems International, Inc. All Rights Reserved.